EDPL-410C2(C3) type microprocessor based line protection and monitoring device,EDP400 series protection,,HengRui Electric Power

Home > Products > EDP400 series protection

EDPL-410C2(C3) type microprocessor based line protection and monitoring device

Overview
Characteristic
Selection Guide

EDPL – 410C2 (C3)type microcomputer line protection device is suitable for the 380 V ~ 35 kV voltage grade of transmission lines and bus coupler switch protection.

protection function

Index	Protection Function
1	Bus-charging protection(for bus-connector protection）
2	Instantaneous protection(with compound voltage and direction locking )
3	Time limit instantaneous protection (with compound voltage and direction locking )
4	Definite-time over-current protection (with compound voltage and direction locking ), inverse time over-current protection
5	Overload protection
6	Zero sequence over-current protection
7	Zero sequence overvoltage alarm
8	Low voltage protection ( under-voltage protection)
9	Under-frequency protection
10	Three phase once reclosing
11	Post-acceleration（instantaneous acceleration、Limit-time instantaneous acceleration、over-current acceleration、zero sequence over-current acceleration）
12	PT Break Judgment

measure function

Index	Electrical parameters	Accuracy
1	secondary & primary protection current value	1%
2	secondary & primary measure voltage value(Uab、Ubc）	1%
3	frequency（F）	0.02Hz
4	power（P、Q）secondary & primary value；power factor（COS￠）	3%

control function

Index	Item	Remarks
1	breaker control	through the menu operation
2	Relay for trip	The device provides 5 output relays used to control the output and signaling functions.

Ordering instructions

Provide the following upon ordering:

1. Name, model and quantity of the device. Please specify any special requirement differs from our standard product.

2. Voltage class. The operating power supply for any device is intended for both AC and DC purposes, with 110V and 220V inputs; the 220V version will be provided unless otherwise specified.

3. Communication port: The device standard communication configure is a single 485. If needs dual RS485 network which shall be specified.

4. Ratings of key parameters

For a protector, provide the nominal rated current (1Aor5A)

For a device with the zero sequence current protection function in a low-current ground system, provide the rated zero sequence current (0.2Aor0.02A)

5. Term and place of delivery, means of transport

6. Other terms shall be negotiated.