Protection Function

1、Bus-charging protection(for bus-connector protection）

2、Instantaneous protection(with compound voltage and direction locking )

3、Time limit instantaneous protection (with compound voltage and direction locking )

4、Definite-time over-current protection (with compound voltage and direction locking ), inverse time over-current protection

5、Overload protection

6、Zero sequence over-current protection

7、Zero sequence overvoltage alarm

8、Low voltage protection ( under-voltage protection)

9、Under-frequency protection

10、Three phase once reclosing

11、Post-acceleration（instantaneous acceleration、Limit-time instantaneous acceleration、over-current acceleration、zero sequence over-current acceleration）

Ordering instructions

Provide the following upon ordering:

1. Name, model and quantity of the device. Please specify any special requirement differs from our standard product.

2. Voltage class. The operating power supply for any device is intended for both AC and DC purposes, with 110V and 220V inputs; the 220V version will be provided unless otherwise specified.

3. Communication port: The device standard communication configure is a single 485. If needs dual RS485 network which shall be specified.

4. Ratings of key parameters

For a protector, provide the nominal rated current (1Aor5A)

For a device with the zero sequence current protection function in a low-current ground system, provide the rated zero sequence current (0.2Aor0.02A)

5. Term and place of delivery, means of transport

6. Other terms shall be negotiated.